Straightening, cutting and bending machines
The tried and tested multi-rotor straightening technology, the flying shears, precision formers and robust bending heads ensure precise, gentle straightening, cutting and bending. This guarantees consistently exceptional quality final production.
Simultaneous double bending means higher output
Automatic change of bending matrix
Maximum bending capacity up to 2 x 20 mm and 1 x 25 mm
Single-rotor straightening machines
The ESR series single-rotor straightening machines are equipped with a single rotor suited to the given wire diameter. This all-round machine was designed for use in factories which place a premium on flexible production while still maintaining high production output.
The rotor straightening system and the wire run-off are designed according to customer specifications and allow you to produce not only straight bars, but also a variety of bars with bending run-off.
Technical features
| ESR 16 | ESR 12 |
---|---|---|
Wire diameters | 6 - 16 mm (#5) | 5 - 12 mm (#4) |
Max. feeding rate | 140 m/min. (460 ft./min) | 140 m/min. (460 ft./min) |
Diameter changeover | manual / automatic (optional) | manual / automatic (optional) |
Drive type | Electric servo-drive | Electric servo-drive |
Automatic rotor adjustment - ARV | optional | optional |
Flying shears | optional | optional |
Automatic spacing | optional | optional |
Run-off process
2BK 16 | ETI | OT | |
Single-strand diameters | 6 - 16 mm | 6 - 16 mm | 6 - 16 mm |
Double-strand diameters | 6 - 12 mm | 6 - 12 mm | / |
Central clamping unit | Yes | No | No |
Automatic | optional | optional | / |
Producer countries | customised | customised | customised |
Bending angle | +180°/-180° | +180°/-900° | +180°/-90°, z-shaped |
Multi-rotor straightening machines
The MSR and Twin MSR series straightening/bending machines work off coil and thus optimize the flow of production. Low storage costs and easier material handling boost cost-effective production. Coupling the machines with a double-bending unit with automatic former changeover transforms the machinery into a multi-functional, high-performance coil-processing station for the production of rebar material and stirrups.
Technical features
| MSR 16 | MSR 20 | MSR 25 | Twin MSR 16 | Twin MSR 20 |
---|---|---|---|---|---|
Wire diameters | 6 - 16 mm | 8 - 20 mm | 12 - 25 mm | 6 - 16 mm | 8 - 20 mm |
Number of rotors | up to 6 | up to 6 | up to 5 | up to 8 | up to 8 |
Diameter changeover | fully automatic | fully automatic | fully automatic | fully automatic | fully automatic |
Electric servo-drive (no hydraulics) | Yes | Yes | Yes | Yes | Yes |
Max. feeding rate | 160 m/min. (525 ft./min) | 160 m/min. (525 ft./min) | 120 m/min. (395 ft./min) | 2x 60 m/min. (197 ft./min) | 2x 160 m/min. (525 ft./min) |
Automatic rotor adjustment - ARV | optional | optional | optional | optional | optional |
Flying shears | optional | optional | optional | optional | optional |
Run-off models
| 2BK 16 | 2BK 20 | 2BK 25 | ETI | OT |
---|---|---|---|---|---|
Single-strand diameters | 6 - 16 mm | 8 - 20 mm | 12 - 25 mm | 6 - 16 mm | 6 - 16 mm |
Double-strand diameters | 6 - 12 mm | 8 - 16 mm | 12 - 20 mm | 6 - 12 mm | 6 - 12 mm |
Central clamping unit | Yes | Yes | Yes | No | No |
Automatic bending diameter | optional | optional | optional | optional | / |
Producer countries | customised | customised | customised | customised | customised |
Bending angle | +180°/-180° | +180°/-180° | +180°/-180° | +180°/-90° | +180°/-90°, z-shaped |